-
Phone
86-21-22810889
-
Address
No. 2185 Laifang Road, Songjiang Area, Shanghai, China
-
E-mail
LatestProducts
230V 1600W Portable Heat Gun with Nozzle and Silicone Roller
Welding Gun, Hot Air Gun, Soldering Gun
Description
Basic Info
- Model NO.: triac S
- Power: 1600W
- Ceramic Heating Element: Kanthal Wire
- Bearing: Imported From Japan
- Accessories: Brush, Nozzle, Silicone Roller
- Warrange: 12 Months Except Ceramic Heating Element
- Transport Package: Carton Box or Tool Box
- Origin: China
- Voltage: 220-230V
- Color: Green, Black, Blue
- Gasket: Resist High Temperature, Imported From Japan
- Body Material: PA66
- Printing: Can Be Your Logo
- Trademark: HEATFOUNDER
- Specification: 1.45kg
Product Description
230V 1600W Portable Heat Gun with Nozzle and Silicone Roller
TECHNICAL DATA:
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.
| Hot air welder | ||||
| Temperature controll | We use photocell to controll temperature inside. | |||
| Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree,the whole circuit will be cut off. |
|||
| Plastic material | At present,this plastic is one can resist the highest temperature. It can resist 280 degree. |
|||
| Bearing | We use high temperature bearing manufactured in Japan. | |||
| Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. |
|||
TECHNICAL DATA:
| ZX1600 | ZX3400 | 1.Power cord |
| Voltage(V) :42 100 120 200 230 For 50/60Hz | Voltage(V) :200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
| Power consumption(W) :960 1400 1600 | Power consumption(W) :3400 | 4.Potentionmeter for temperature adjustment |
| Weight (kg) :1.3 with 3m cord | Weight (kg) :1.4 with 3m cord | 5.Handle & Nozzle |
| Temerature :20-700 degrees Celsius,infinitely controlled | 6.Air fillter | |
| Air flow (1/min) :Max.230 | 7.Rubber stand | |
| Air pressure (pa) :3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
| Size (mm):Customized | 9.Heat protection tube | |
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.